It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. “How To Adjust Outdoor Flood Light Settings”. Being in one piece doesn’t take away from its flexibility, though. That is because the solar panel attached retains some level of adjustability. This light is also quite bright, at 800 lumens. Although not the brightest option, it falls well within the ideal brightness for an outdoor flood light.
Posted by2 years ago
Archived
I have 5 Stick Up Cams, Solar panels, I have 2 Doorbells, 2 Flood Light Cams,
I love the Ring Ecosystem.
That being said. I am in so much grief with this. About a month ago on the same day both Flood Light Cams keep the lights on 24/7. If I turn then off, the first motion turns them on during the day and they stay on.
I have called Ring 4 times, they have had me reset, do all these things, Then they say the problem is a tracking issue and they don't have a solution.
This is going on for a month. They need to decide what to do here. And let me send these back or send new ones.
Does anyone else have this problem?
17 comments
Motion detector lights have long been used as a first step to stopping intruders from approaching a home or business. Conventional security lights with motion detection sense objects and people crossing the path of the motion detector's sensor, triggering the lights to go on. But now there are more sophisticated sensors that actually detect body heat. Here's a look at the benefits of them and how they work.
Problems With Motion Detection
First, let's consider regular motion sensors. Yes, they detect motion and turn on lights. And you can adjust the sensitivity so little things don't set them off. The problem I see with them is that things like tree limbs, tall grasses, heavy snow or rain, and perhaps most commonly, cats and raccoons, keep setting them off in the middle of the night. Wouldn't it be great if the lights could distinguish between those kinds of 'disturbances' and humans approaching?
How Body Heat Sensors Work
These newer style sensors actually check for body heat using infrared rays. When someone approaches, the sensors turn on the lights. So what about things like cats, raccoons, and other small animals that also have body heat. Well, they could set off the sensor if the sensitivity is set high enough. And who knows, maybe you want to know if a stray dog enters your yard. But for people, the sensitivity can be set to detect only larger bodies, thus ignoring small creatures of the night.
Setup Tips for Body Heat Sensors
Keep the following considerations in mind when choosing and setting up a body heat security light:
Check the wattage limit on the light fixture to make sure the combined wattage of the light bulbs doesn't exceed the limit. This should be no problem with energy-efficient LED bulbs, and LEDs aren't affected by low temperatures the way compact fluorescent bulbs are.
Adjust the sensor for a range of 30-60 feet to start. This gives you plenty of heads-up for approaching people while not being too broad-reaching. Experiment with different sensor settings to find what works best for your situation.
Mount the fixture between 6 and 12 feet from the ground. Anything higher and the ground coverage is diminished. The ideal height is around 10 feet because it's high enough so that the lights can't easily be tampered with.
Remember that this is a heat source detector, so keep it away from heat-producing objects like swimming pools, windows, reflective items, dryer vents, heater exhaust, etc.
Aiming the Sensor
You might think that facing the sensor straight toward the intended target, maybe along an entrance sidewalk, would be the logical direction to face the unit. However, there is a dead zone in the area coming straight towards the sensor, and someone could possibly walk right up to the house undetected. Instead, mount the sensor to the right or left of the area being monitored to establish a crossing area of coverage that someone would have to walk through, say, at a 10-degree angle. That way, people will walk through the lobes of detection, not between them.
Depending on how your lighting scheme is wired, you may light only the front door area, or there may be a combination of lights that are triggered when someone approaches. The idea is to give you and anyone approaching a warning. For you, it tells you someone is approaching your home's door. For the visitor, it sends a message that they have already been seen and that you are turning on the light to see who it is. If it is a burglar, you may just deter him or her from proceeding!